Product Category: Rectangular Sucker Solenoid
Tension nominale : CC 6 V 12 V 24 V (personnalisable)
Rated Power: 48-90w
Force: 2200-2500N
Temperature Rise:65℃ Max
Duty Circle:50-100%
Durée de vie utile : 0,5 million de cycles (10%)
Dimension: 300*60*30 mm
Le principe de fonctionnement du sucker solenoid electromagnet is to generate a magnetic field by energizing the internal coil, so that the iron core is magnetized and generates a strong suction force, thereby adsorbing the magnetic conductive parts. Specifically, when the coil is energized, a magnetic field is generated, and this magnetic field will be added to the iron core, so that the iron core is magnetized and generates a strong suction force, which can adsorb the magnetic conductive parts. The iron core is usually made of soft iron or silicon steel, the adsorption surface is integrally connected to the yoke iron part, and the hollow part is sealed with epoxy resin glue. The specific process is as follows:
1.1.1. Power on to generate a magnetic field
When current passes through the coil, a magnetic field is generated around the coil. The direction of the magnetic field is determined by the direction of the current (following the right-hand rule).
The presence of the iron core can significantly enhance the strength of the magnetic field because the iron core has a high magnetic permeability and can concentrate the magnetic lines of force.
1.1.2. The attraction of the magnetic field to ferromagnetic materials
When the adsorption surface of the suction cup electromagnet is close to the ferromagnetic material (such as steel, iron, etc.), the magnetic field will penetrate the target object.
The target object is magnetized, generating a magnetic pole opposite to the magnetic field of the electromagnet, thereby forming a strong attraction between the two.
1.1.3. Maintaining the adsorption force
As long as the coil is powered, the magnetic field will continue to exist and the adsorption force will continue to be maintained.
When the current is disconnected, the magnetic field disappears, the adsorption force disappears, and the target object is released.
Sucker solenoid electromagnet is a device that uses electromagnetic force to generate adsorption force. It is widely used in industrial grasping, fixing and handling. Its core principle is to generate a strong magnetic field by powering on, and use the attraction of the magnetic field to ferromagnetic materials to achieve adsorption. Sucker solenoid electromagnets usually consist of the following parts:
1.2.1. Coil: Generates a magnetic field after powering on.
1.2.2. Core: Usually made of soft magnetic material (such as silicon steel) to enhance the magnetic field.
1.2.3. Housing: Protects the coil and core, and provides mechanical support.
1.2.4. Working Surface: The part that contacts the target object, usually designed as a plane or arc to increase the contact area.
The advantages of sucker solenoid electromagnets mainly include the following aspects:
1.3.1-Strong suction: Suction cup electromagnets can generate strong adsorption force when powered on, which is suitable for various lifting and fixing operations. For example, the suction force of a strong suction cup electromagnet can reach 330kgf, which is suitable for stopping and moving materials or products in automation equipment.
1.3.2-Wide range of applications: Suction cup electromagnets are suitable for a variety of industrial application scenarios, including automated distribution production lines, sorting machines, manipulators, experimental equipment, medical treatment, grinding, cutting and cutting. It is small in size, easy to install, can save labor and electricity, is safe and reliable, and supports remote operation.
1.3.3-High precision and stability: The strong electromagnetic suction cup can maintain low temperature and will not heat up during long-term use, ensuring processing accuracy. Its high-precision design makes the disk highly stable within the range of 2um/100mm, providing solid precision guarantee for the processed parts.
1.3.4-Safety performance: Suction cup electromagnets usually have a higher safety factor, for example, the rated lifting force has a safety factor of 3.5 times, ensuring safety during use.
1.3.5-Environmental protection and energy saving: Suction cup electromagnets produce almost no residual magnetism after power failure, avoiding environmental pollution and energy waste. Its design makes the power loss small, meeting the requirements of energy saving and environmental protection.
1.3.6-Diverse designs and functions: Suction cup electromagnets have a variety of design types, such as energized adsorption type, self-holding type, double-sided suction cup, etc., to meet the needs of different application scenarios.
| Caractéristiques | |||
| Marque | Personnalisé | Nom du produit | square electromagnet |
| Modèle | SFSS-004 | Tension nominale | 12 V CC 24 V |
| Pouvoir | 48-90w | Force | 2200-2500N |
| Waterproof Class | IP65 | Cycle de service | 50-100% |
| Longueur du câble | 200mm | Matériel | Pièces métalliques et électroniques |
| Action Form | Holding type | Poids (NW) | 3.5kg |
| Style d'installation | Vis | Thread Size & Deepth(mm) | 4-M8,16 |
| Test de haute tension | CA 600 V 50/60 Hz 2 s | Insulation Class | B |
La grande robustesse du ressort assure une élasticité optimale même après une utilisation répétée, garantissant ainsi une expansion et une rétraction rapides.
L'utilisation d'une bobine en cuivre conforme aux normes nationales, de composants à noyau bobiné, assure une dissipation thermique plus rapide, une faible consommation d'énergie, une température basse et une longue durée de vie, améliorant ainsi l'efficacité de l'électroaimant et prolongeant sa durée de vie.
Installation facile et pratique, le filetage est fixe, l'installation est stable, le démontage est aisé, ce qui permet de gagner du temps et de l'énergie.
Excellentes performances de dissipation thermique : Fabriqué à partir de matières premières de haute qualité, ce produit est durable, offre une bonne dissipation thermique, résiste aux fortes variations de température et ne génère aucune énergie magnétique rémanente.
Le Sucker Solenoid L'électroaimant est un composant électronique non standard et personnalisé. À l'exception du cadre de la bobine, qui est moulé, les autres accessoires et paramètres peuvent être personnalisés selon les besoins.
Processus de personnalisation :
4.1. Contactez-nous : Veuillez nous contacter par e-mail ou WhatsApp.(+86 18902611680)
4.2. Fournir les exigences : Indiquez les paramètres tels que la tension, la force, la course, le rapport marche/arrêt et la taille.
4.3. Specification confirmation: We select and issue specifications according to requirements. Except for the outer frame size, other shaft sizes and lengths can be customized. If it is made according to a specific outer frame size, a mold needs to be opened.
4.4. Proofing: We make samples according to the specifications, and the production cycle is about 7 days.
4.5. Sample testing: If the sample test is qualified, a batch order will be placed. If it is unqualified, the sample will be remade.
4.6. Mass production: Sign a bulk purchase and sale contract.
Sucker solenoid electromagnets are widely used in the following fields:
5.1-Industrial handling: used to carry heavy materials such as steel plates and iron blocks.
5.2-Machining: used to fix workpieces and improve processing accuracy.
5.3-Automated production lines: used to grab and move parts to achieve automated operations.
5.4-Construction industry: used to hoist and fix steel structures.
5.5-Logistics warehousing: used to sort and stack metal products.
Our headquarters is located in Guangdong, China. Since 2015, we have developed and produced electromagnets and sold them to North America (35.00%), South Asia (25.00%), Western Europe (20.00%), South America (15.00%), Northern Europe (5.00%).
We are a Chinese top manufacturer and our factory is located in Dongguan. Welcome to visit our factory!
We pecialize in the design and production of high quality electromagnet,solenoid valve,such as rotary solenoid bistable solenoids latching solenoids open frame solenoids tubular solenoids self-holding solenoid
Bien entendu, nous fournissons généralement des échantillons gratuits ; vous n’avez qu’à prendre en charge les frais de port. Pour les échantillons d’électroaimants sur mesure, veuillez nous communiquer vos exigences afin que nous puissions vous indiquer le coût de l’échantillon.
• La production d'un échantillon prend environ 7 jours.
Oui, nous proposons des services de conception gratuits, incluant la conception structurelle et la conception graphique simple.
Bien sûr. Nous pouvons fabriquer n'importe quel électroaimant selon votre conception. Nous proposons désormais un service ODM de solénoïdes pour les petites séries (de 100 à 500 pièces), avec la possibilité d'y apposer votre logo.
En fonction de la quantité commandée et des détails de production, cela prendra environ 15 à 20 jours.
Toujours un échantillon de préproduction avant la production en série ; toujours une inspection finale avant l'expédition
• Puissance, consommation, dimensions, matériau, quantité, destination de livraison, etc.
• Vous pouvez aussi simplement nous faire part de vos besoins et nous vous recommanderons des produits.
• Par mer, par air ou par transport express.
• Si vous avez votre propre transitaire en Chine, il s'agit du prix départ usine ou FOB.
•CFR ou CIF, etc., si vous avez besoin que nous expédiions en votre nom.
• Le DDP et le DDU peuvent également être utilisés.
• Plus de choix, nous prendrons en compte vos choix.
Use our professional design experience to customize your brand electromagnet!
English English
Arabic
Turkish
Vietnamese
German
Russian
Italian
French
Spanish
Portuguese
